Installation Guide
Capture your adventure
Simple installation with EasyMounts
Installing our camera mounts is quick and easy. Follow these instructions to mount your camera mount easily and securely. It only takes a couple of minutes.
Step by step
- Clean the surfaceClean the surface of your helmet with the included cleaning wipe. Then let the surface dry before the next step.
- Find the right positionFind the correct position on your helmet. (Do this before removing the red plastic)
- Heat the adhesiveRemove the red plastic and heat the adhesive. (You can easily do this with a hair dryer, heat gun, fan heater, or similar) It is important that the adhesive is warm when mounted so that it adheres properly.
- Press the mount into placeApply the mount to the helmet and press it firmly against the helmet for a couple of seconds.
- Wait 24 hoursWait 24 hours before use.
- DoneThe mount is now securely attached and you can start using it, our mounts withstand rain and high speeds!
Keep your eyes on the road!
Never operate or mount your camera while driving; this must be done while stationary under controlled conditions! Always check that the mount and camera are securely attached before every use. We disclaim all liability for any personal injury or property damage. All use of EasyMounts camera mounts is at your own risk.
We always recommend using some type of extra tether! (E.g. a fishing line between camera and helmet) This is to prevent potential personal injury or property damage.
We are here to help you!
Is anything unclear or do you have other questions? Contact us.